Skip to content

U-Fill 1500 ml Dual Cartridge U-Fill Packaging Station

$95.00

The U-Fill 1500 ml Dual Cartridge U-Fill Packaging Station makes it profitable to transfer any one part or 1:1 ratio adhesive, sealant, coating or mastic, from its original container, to 1500 ml cartridges. You can do it on the jobsite. 

The portable U-Fill 1500 ml Dual Cartridge U-Fill Packaging Station makes it easy.

What you get:

  • 1 - 1500 ml Dual Cartridge Fill Stand
  • 100 Color Coded A&B Breather Fill Strips
  • 2 - Color Coded A&B Measuring Cups (750 ml)

Transferring product from barrels to U-Fill 1500 ml Dual Cartridges is a quick and easy way to save a lot of money.

Example: Two part urethane foam is commonly used in the roofing industry as an adhesive to attach rigid insulation boards to the buildings roof deck. 

When the project is small, isolated, congested, or when local conditions are not suitable for a pump application, many contractors prefer materials packaged in 1500 ml cartridges. They're easy to use with low cost application tools.

Because A&B materials are dispensed at the same flow rate, dual cartridges provide the optimum mix, which is a big contributor to long term performance.

Pre-filled 1500 ml cartridges can be one of the most expensive low rise urethane options. A four cartridge box contains 1.6 gallons of adhesive. Depending on your location or order size, a box of cartridges can cost $250.00 and higher. Each box covers 400 sq. ft. based on a coverage rate of 250 sq. ft. per gallon..

Save with U-Fill 

It takes less than 10 minutes to fill four 1500 ml cartridge sets. Labor cost will vary. For illustration purposes, let's say your labor cost is $100.00/hour. One person can fill 24 U-Fill 1500 Cartridges per hour. That's equal to 6 pre-filled boxes. 

Here's the math based on filling U-Fill 1500 cartridges. Enough adhesive to adhere about 20,000 square feet of rigid roof insulation(based on manufacturers estimate). You'll need 50 boxes, costing $12,500.00

- 200 Cartridges cost $1480.00

- 80 gallons of low rise adhesive @$50.00/gl cost $4000.00

- 8.5 man ours labor @ $100.00/hour cost $850.00

Based on this example, total cost to fill 200 U-Fill 1500 cartridges will be $6.330.00. Resulting in savings of $6,170.00 (nominal 49%) per layer of insulation/cover board on a 200 square project. If you are paying more than $250.00 per box, your savings will be higher.

Should you prefer large packaging, check out InvertaPress 4000 and U-Fill 16,275 ml cartridges. This revolutionary dispensing system provides the same matched flow technical advantages associated with 1500 ml cartridges.

Our U-Fill 16,275 ml x 2 A&B cartridge sets hold about 21 times the volume.

Here's the math based on filling U-Fill 16,275 ml cartridges. Enough adhesive to adhere about 20,000 square feet of rigid roof insulation(based on manufacturers estimate)

- 20 Cartridges cost $200.00

- 80 gallons of low rise adhesive @$50.00/gl cost $4000.00

- 1.5 man ours labor @ $100.00/hour cost $150.00

Total cost would be $4,350.00. Resulting in savings of $8,150.00 (65%).

There's no better way to make more money while achieving peace of mind that materials are properly mixed.

It's easy. Reach out to us at contact@advantecbp.com to find out how much you'll save, with U-Fill packaging, on your next project.