Skip to content

U-Fill-16,275 ml Cartridges

$258.70
26 Red


Advantec Building Products makes it easy for contractors to make more $$$$. U-Fill-16,275 ml Cartridges are designed for use with the InvertaPress 4000 dispensing system.

Simply transfer your favorite adhesive, sealant or coating from its original pre-filled container to color coded U-Fill-16,275 ml Cartridges (A&B sets net 32,550 ml) to experience all the economic and technical advantages associated with InvertaPress 4000

If you like the consistency and technical superiority associated with 1500 ml cartridges. You'll love InvertaPress 4000 combined with U-Fill-16,275 ml Cartridges. Each A&B set (net 32,550 ml) contains 21.7 x the volume of 1500 ml cartridges. Perfect for large projects.

Estimated Savings:

On a typical 10,000 sq foot roofing project, adhering 2 layers of rigid insulation/cover board (net 20,000 sq.ft.) with low rise urethane adhesive, you can save a lot of money. Based on a 250 sq. ft. per gallon coverage rate you would need 80 gallons of adhesive. 

The project would require 50 - boxes (1.6 gallons - four A&B sets per box) of adhesive packaged in 1500 ml cartridges, totalling 200 A&B sets. Each 1500 ml A&B set adheres 100 sq.ft. of insulation.

50 boxes of Pre-filled 1500 ml cartridges@$250.00 would cost $12,500.00.

With U-Fill 16,275 ml (A&B set nets 32,550 ml) you would dispense less than 10 A&B sets. Your total cost would be $4,499.00, plus fill time Labor, estimate 5 minutes per cartridge. You save $8,001.00 (64%)

Total Cost Assumptions:

  • U-Fill 16,275 ml cost - $199.00
  • Pre-packaged fill material - $4,300.00 (86 gallons x $50.00 / gallon)
Why you should purchase this product.
  1. Make more money.
  2. Never clean a pump again.
  3. U-Fill-16,275 ml Cartridges allow you to take advantage of all the technical benefits, labor savings and cost savings associated with the InvertaPress 4000 dispensing system. InvertaPress 4000 does everything a pump does and much. much more.
    1. Dispenses both One-Part and Two-Part materials.
    2. Supports multiple application tools at the same time.
    3. No clean-out or flushing required between material change outs. 
    4. InvertaPress 4000’s closed system dispenses materials directly from U-Fill-16,275 ml Cartridges, through the supply hose, to your application tool. Materials never come into direct contact with the InvertaPress 4000 unit .
    5. Un-like pumps, there are little to no maintenance requirements with InvertaPress 4000.
    6. InvertaPress 4000 delivers two-part materials to the mixing head at matched flow rates, even when Sides A&B have different viscosities due to design, age or temperature. Resulting in a proper mix every time.

Transferring product from barrels to U-Fill-16,275 ml Cartridges is quick and easy. 

For materials originally packaged in drums or totes:

  1. Simply attach a spigot to the drum or tote. For moisture sensitive materials attach a desiccant filter to the containers breather vent.
  2. Position the drum horizontally, upon a drum dolly, or place the tote at an elevation that is higher than the top of the U-Fill container.
  3. Fill each U-Fill cartridge to within 1” - 2” from the top. Take steps to ensure all containers are filled evenly.
  4. Attach the shipping cap. You’re done.

For materials originally packaged in pails:

    1. Place a large funnel into the opening at the top of the cartridge.
    2. Empty the contents from the pail into the U-Fill cartridge. When transferring materials from containers larger than 16,275 ml (4.3 gallons), use the remaining material to fill the next U-Fill canister.
    3. Fill each cartridge to within 1” - 2” from the top. Take steps to ensure all canisters are filled evenly.
    4. Attach the shipping cap. You’re done.